后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

注意力机制量化剪枝优化方法

面向基于注意力机制模型的巨大计算和访存开销问题,研究量化和剪枝协同优化的模型压缩技术,提出针对注意力机制中查询、键、值、概率共四个激活值矩阵的对称线性定点量化方法。同时,提出概率矩阵剪枝方法和渐进式剪枝策略,有效降低剪枝精度损失。在不同数据集上的实验结果表明,针对典型基于注意力机制模型BERT,在较低或者没有精度损失的情况下该优化方法可达到4位或8位定点量化、0.93～0.98的稀疏度,大幅度降低模型计算量,为加速量化稀疏模型的推理奠定良好的基础。     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

高隔离度干涉截止滤光片的设计与制备

根据光通讯无源器件和激光探测仪器对光学薄膜的特殊需求,采用解析法和自动优化法综合设计了高隔离度的干涉截止滤光片,分析了膜厚改变2%对设计膜系的透过率曲线的影响,通过莱宝APS1104镀膜机对所设计的膜系进行了实际镀制,获得了性能优良的高隔离度截止滤光片.     

基于不确定性理论的研制技术风险评估方法研究

分析了装备研制技术风险的含义,根据技术风险的特点建立了评价技术风险的指标体系。在技术风险度量中引入不确定性理论的概念,并建立了基于不确定性的技术风险的度量方法,对综合技术风险进行评价。最后通过实例验证了综合评价方法的可用性。     

陆军诸兵种合同作战兰切斯特方程的弹药消耗预测研究

描述了诸兵种合同作战的兰切斯特方程及其矩阵解,提出了一种通过兵力损耗换算弹药损耗的新思路,分析和确定了用该方法预测弹药消耗的相关参数,最后运用Matlab进行仿真计算,预测出了武器装备战损情况和弹药消耗情况。     

美军作战实验室建设研究

简要回顾了美军作战实验发展的历史,从军种到联合详细阐述了美军作战实验室完整的体系,并简要介绍了各作战实验室所完成的典型实验,研究了美军作战实验室主要的实验方法和技术手段,剖析了美军作战实验室的运行机制,探讨了美军作战实验室建设带给我们的启示。     

前缘和转轴影响翼摇滚特性的数值模拟

采用耦合求解N-S方程和Euler刚体动力学方程的数值模拟方法研究80°后掠三角翼摇滚特性,讨论机翼前缘构型和滚转轴位置对三角翼摇滚特性的影响。N-S方程的离散采用Roe格式和含双时间步的LU-SGS方法,刚体动力学方程的离散采用二阶精度的差分方法,通过交替求解流动和运动控制方程组的耦合策略,模拟80°后掠三角翼自激摇滚的非定常过程。针对转轴安装于上表面的细长三角翼,研究前缘上削尖、下削尖和双面削尖三种构型的翼摇滚特性,分析前缘构型对摇滚振幅及分岔攻角的影响。考虑到上削尖和下削尖构型在翻转后相当于前缘构型互换但转轴位置不同,进一步考察了滚转轴位置对三角翼摇滚特性的影响。结果表明:在一定的攻角下,三种不同前缘构型的三角翼均能形成大幅自维持的摇滚现象,其中上削尖前缘的三角翼振幅最大,双面削尖前缘次之,下削尖前缘三角翼振幅最小;攻角增大到30°以后,双面削尖和上削尖前缘的三角翼会发生翻转现象,翻转180°以后维持等幅振荡。